Fire House Training Manikin
A perfect manikin for 'snatch rescues' in the higher temperatures of a fire house, aircraft fuselage or shipping container. The Fire House Manikins demonstrate a good balance between temperature and abrasion resistance. They are predominately designed for BA snatch rescue training in fire houses and for 'hot fire cell' training. The Fire House Manikins will easily withstand temperatures of around 160°C at floor level (400°C at the ceiling!) for many hours - they will of course deteriorate if placed to close to naked flames or in excessive temperatures, just as any fire kit would!
Features & Benefits
Anatomically correct weight
distribution gives the 'feel' of an
unconscious casualty.
Strong enough to be buried under
concrete or steel lintels - the
Nomex coverall is not as tough as
the Polyester version used in the
Duty range but these manikins can
still be used for general training
exercises.
The neck provides the ability to fit
an immobilisation/extrication collar
- to promote proper casualty care.
Soft body joints eliminate the risk
of pinch welts and bruising, a
common injury when using plastic
bodied manikins.
The protective coveralls and boots
greatly extended the life of the
manikins and are easily 'user'
replaceable if damaged.
A separate hood, also made in Nomex
completely covers the head - being
separate this makes the fitting of
replacement coveralls considerably
easier.
Product Details
•Main carcass: Constructed in the
same flame retardant Polyester
(conforms to BS EN ISO 15025:2002)
used in Police ballistic/stab vests.
•Main carcass : reinforced with 38 mm
Nomex webbing - standard
Polypropylene webbing will go
brittle and melt at the high
temperatures this manikin is
designed to withstand.
•Protective coveralls are constructed
using a Nomex blend material
(conforms to EN11612) and offers
good protection against high
temperatures - it is permanently
non-flammable and most commonly used
in protective clothing to protect
against heat and flames.
•Protective coveralls are also
reinforced using Nomex webbing to
improve the abrasion resistance and
strength.
•Protective coveralls are fitted
using 20 mm Kevlar ties, as the
standard Velcro fastening melt at
these high temperatures.
•The ends of the coverall arms, which
have been identified as a high wear
area, are reinforced with 5 mm
leather to provide extra protection.
Available Sizes
| Name | Code | Height (m) | Weight (Kg) |
|---|---|---|---|
| Toddler | RLNFH10 | 0.9 | 10 |
| Youth | RLNFH20 | 1.3 | 20 |
| 30 Kg Adult | RLNFH30 | 1.8 | 30 |
| 50 Kg Adult | RLNFH50 | 1.8 | 50 |
| 70 Kg Adult | RLNFH70 | 1.8 | 70 |
